Fluke Calibration 9103 Calibration Instruments
  • Fluke Calibration 9103 Calibration Instruments

Fluke Calibration 9103


Field Dry-Well Temperature Calibrator with Model 3103



The Fluke Calibration 9103A156 Field Dry-Well Temperature Calibrator with Model 3103-2 ("A" Insert), -25 °C to 140 °C may be used as a portable instrument or bench top temperature calibrator for calibration thermocouples and RTD temperature probes. The 9103-A-156 is small enough to use in the field and accurate enough to use in the lab. With an ambient temperature of 23°C (74°F), calibrations may be done over a range of -25°C to 140°C (-13°F to 284°F). The resolution of the 9103-A-156 temperature display is 0.1 degrees.

The temperature is accurately controlled by Hart's hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with pulsed driven Thermal Electric Devices (TED).

The LED display panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The calibrator's multiple fault protection devices insure user and instrument safety and protection.

The 9103-A-156 Dry-well was designed for portability, low cost, and ease of operation. Through proper use, the instrument will continuously provide accurate calibration of temperature sensors and devices. The user should be familiar with the safety guidelines and operating procedures of the calibrator as described in this user manual.

Product Features:


  • Lightweight and very portable
  • Accuracy to ± 0.25 °C
  • RS-232 included
  • Interchangeable inserts
  • Goes as low as -25 °C
  • Convenient handle
  • Universal AC input
  • Temperature scan rate control
  • Temperature switch hold
  • Eight set-point memory
  • Adjustable readout in °C or °F


  • Six miscellaneous holes
  • Hole quantities and sizes: 1 Hole, 1.6 mm (1/16 in.); 1 Hole, 3.2 mm (1/8 in.); 1 Hole, 4.8 mm (3/16 in.); 1 Hole, 6.35 mm (1/4 in.); 1 Hole, 9.5 mm (3/8 in.); 1 Hole, 12.7 mm (1/2 in.)
  • Removable inserts sized for probes with named diameter
  • Use additional inserts to broaden range of hole sizes available
  • For use with Models 9011 and 9103
Product Details
6 other products in the same category:

Reference: AM95729139AA

Brand: Ametek

Ametek ASM801BCF

Advanced Signal Multi-Scanner, Model B with 8 Universal Plugs/Circuit, Case, NPL

Price $2,662
In stock

Reference: KE57570608K2

Brand: Keithley

Keithley 2790

DMM/SourceMeter Airbag Test System with GPIB and RS-232 Interfaces

Price $1,934
In stock

Reference: EX84378320E4

Brand: Extech

Extech 407766-NIST

Sound Level Calibrator with 94 dB or 114 dB Output with NIST Calibration

Price $265
In stock

Follow us on Facebook