Megger 560400 Calibration Instruments
  • Megger 560400 Calibration Instruments

Megger 560400


Motor and Phase Rotation Tester, 25/50/60/400 Hz



The Megger 560400 Motor and Phase Rotation Tester permits the electrical contractor or industrial maintenance electrician to permanently connect and tape the terminals of the motor being installed, without having to first energize the motor by a temporary hookup from a power source, if available, to determine motor rotation. Therefore, the test set eliminates the need for temporary connections that can be time consuming, costly and quite hazardous, particularly where many large, high-voltage motors are involved.

Also, certain types of drives should never be rotated in the wrong direction. In such cases, the temporary hookup or trial method, having a fifty-fifty chance of being wrong, can do serious harm.

The three motor leads on the left side of the test set are for attachment to the terminals of the motor being tested for rotation determination.

Fuses are inserted in the motor A and C test leads as protection in the event the user accidentally touches these leads to an energized circuit. These standard fuses are easily removed and replaced from their panel-mounted holders.

The three lines leading to the right of the test set are for direct attachment to energized ac power systems up to 600 volts to determine the system phase sequence. A four-position switch selects the test to be made - system phase sequence, motor rotation and transformer polarity. The selector switch connects a D-size dry cell into the circuit when the rotation of a motor or the polarity of a transformer is being checked. In the OFF position, both the meter and the battery are disconnected from all circuits.

A push switch is connected in series with the battery and opens the circuit during transformer polarity testing.

The dry cell is easily removed and replaced from its panel-mounted holder by a coin-slot access cap. The dc zero-center ammeter indicates correct or incorrect rotation or polarity by deflecting its pointer to the right or left. A zero or null adjuster is provided for the ammeter.

Product Details
6 other products in the same category:

Reference: EX36775139E3

Brand: Extech

Extech 380950-NIST

AC/DC Mini Clamp Meter, 400VAC/DC, 80AAC/DC Small Diameter Elongated Jaw with NIST

Price $99
In stock

Reference: FL50403787F7

Brand: Fluke

Fluke 772

Milliamp Process Clamp Meter with Loop Power, 4-20 mA

Price $561
In stock

Reference: FL24706323F3

Brand: Fluke

Fluke 376 FC

Wireless True-RMS AC/DC Clamp Meter with Fluke Connect Compatibility, 1000A AC/DC, 1000V AC/DC

Price $221
In stock

Reference: BE28109134BB

Brand: Besantek

Besantek BST-LT03

AC Leakage Clamp Meter, AC 200V / AC 600V (0.1V/1V Resolutions)

Price $230
In stock

Follow us on Facebook